To SEARCH (on this page): Press Ctrl + F keys (at same time), type item wanted in "Find" box.
| Popular CB Radio Channel Readout LED's | |
| LED-3068 red 7 segment use (2) for Cobra 2000 channel readout (slightly smaller digits than original) | $3.24 |
| FND507 red 7 segment LED readout |
 |
| figure 3068 |
| Common Anode 18-pin Dual Digit Channel readout (7 segments/digit) | |
| NTE-3074 Red Dual Digit 18 pin +/ComA replace FND6710 GL6P201 GL6R201 LL2253Y4 SEA4612 | |
| MAN6710JP red 18 pin dual digit channel readout replaces LED-3074 etc | out of stock |
| [3] LL-2956 integrated display board Chan/S/RF with up & down buttons | |
| [3] LL-2959 integrated display assembly Chan/S/RF |
| Common Cathode 18-pin Dual Digit Channel readout (7 segments/digit) | |
| MAN6740JP red dual digit 18 pin chanel readout replaces LED-3075 | out of stock |
| NTE-3075 Red Dual Digit 18-pin channel readout -/Common Cathode | ($6.45) |
| Common Anode 16-pin Dual Digit Channel readout (7 segments/digit) | |
| LB402DA Orange Dual Digit 16-pin +/Common Anode channel display | $6.37 |
| 4233RA (replaces MSD4910C) Red 16-pin +/Common Anode popular Cobra, Galaxy, Uniden CB's | $7.50 |
| 4233RA directly replaces Toshiba TLR321, LTD482, Uniden UR202, SEA4612, Rohm LB402VA | |
| testing 4233RA (& similar) Common Anode displays: put (+) lead of Zener tester to center two pins on the part number side of the display, touch (-) lead to each of the other pins to check each segment | |
| Note: Some LED displays have common pins on the side with part number, others may have common pins on opposite side compared to the part number | |
| MSD-series need to be installed with fake decimal points up in most CB radios | |
| to replace DR202AL: use 4233RA; extend leads 5/8" longer |
 |
| figure 4233RA |
| MSD4410C Green 16-pin +/Common Anode (replaces LB402MA) & A-402G-L9 Cobra 29, Uniden | $6.37 |
| 4233GA Green 16-pin +/Common Anode Channel Readout Galaxy 949 etc radios | $7.50 |
| LDG202ALD, (Uniden BDAY0187001) 16-pin long lead green +/Common Anode dual digit channel readout | |
| MSD-series need to be installed with fake decimal points up in most CB radios |
| 4233BA Blue 16-pin +/Common Anode Dual Digit Channel Readout Galaxy 959 etc | $9.20 |
| 4233BA Blue Readout fits many popular Cobra & Uniden CB's (not "Cobra 25" PLL radios) |
| MSD4940C Red 16-pin -/Common Cathode replaces TLR320 Panasonic & Cybernet CB's | $6.37 |
| MSD4440C Green 16-pin -/Common Cathode "Cobra25" PLL chip CB's; Galaxy DX73V | $6.37 |
| MSD-series need to be installed with fake decimal points up in most CB radios |
| [1] LDD4062-10/P10 16-pin (long lead) Common Anode green dual digit channel readout fits Galaxy DX949 & DX959 etc | |
| TLR306 single digit 10-pin +/Common Anode channel readout | $3.00 |
| PH85-1180 (=A-561H) 7-Segment single digit 10-pin +/Common Anode display | $3,54 |
| PH85-1188 (=CSA-1000EWA) Ten section LED Bargraph Display | $6,63 |
| [3] BBLY0052001 integrated display dual digit channel with other indicators included |
| [1] BDAY0421001 integrated CB Radio dual digit channel readout with 4-Segment signal level indicator |
| [1] BDAY0623001 (LL-2959-48*) integrated dual digit channel readout with multi-segment meter, Tx, Rx indicators |
| [2] BDAY40839001 (long pin) integrated CB Radio dual digit channel readout with 4-Segment signal level indicator |
| [2] SMV 4099 200 50389-201 8 digit number display |
| LED's | |
| PH85-107 Bright White 5MM LED 20mA 2VDC* | $5.88 |
| NTE3000 (4) clear T-3/4=1.8mm red LEDs 2VDC* | 2.50 |
| NTE3001 (4) minature T-3/4=1.8mm red LED 2VDC* | 1.76 |
| NTE3002 (2) minature T-3/4=1.8mm yellow LED 2VDC* | 1.65 |
| NTE3003 (2) minature (discontinued) green LED 2VDC* | 1.42 |
| NTE3004 (2) minature T-3/4=1.8mm red LED 2VDC* | 1.10 |
| NTE3005 Infrared (discontinued) Emitting Diode | 3.94 |
| NTE3007 (4) small T1=3mm red LED 2VDC* | 1.76 |
| NTE3008 (2) bright T1=3mm red LED 2VDC* | 1.19 |
| NTE3010 (2) small T1=3mm green LED 2VDC* | 1.19 |
| NTE3011 (2) small T1=3mm yellow LED 2VDC* | 1.19 |
| NTE3013A (4) clear T1-3/4=5mm red LEDs 2VDC* | 1.76 |
| NTE3015 size T1-3/4=5mm Green LED | 1.92 |
| LMH100 plastic mount clips for T1=3MM LED | 20/pak=$4,77 |
| NTE3016 green(receive) red(xmit) indicator =TLRG-101 Cobra CB's | use EX01N40004 $3,57 |
 |
 |
| figure 3016 | figure 3008 size T1 =3mm LED |
| 94553 dual color red/green 3MM LED(on backorder) | 10/pak=$6,75 |
| XC52RGJP dual color red/green 3-lead 5MM LED | 6/pak=$3,75 |
| LMH200JP plastic mount clip & ring: T1-3/4 5MM LED | 20/pak=$7,05 |
| NTE3018 size T1-3/4=5mm soft-red LED 2VDC* | 2/pak=$2.05 |
| NTE3020 size T1-3/4=5mm Red LEDs 2VDC* with mount clips | 2/pak=$1.16 |
| NTE3021 size T1-3/4=5mm yellow LED 2VDC* with mount clips | 2/pak=$1.41 |
| NTE3022 size T1-3/4=5mm Bright Red LED 2VDC* with mount clips | 2/pak=$1.26 |
| NTE3024 size T1-3/4=5mm Green LED 2VDC* | 2/pak=$1.39 |
| NTE3025 size T1-3/4=5mm Red LED 2VDC* | out |
 |
 |
| figure 3020 size T1-3/4 =5mm LED | figure 3024 size T1-3/4 =5mm LED |
| NTE3026 T1-3/4=5mm Red/Green Polarity Indicator LED 2VDC* | 3.35 each |
| NTE3027 high speed Infrared remote control Emitting Diode | 3.25 each |
| NTE3028 Infrared Emitting Diode | out |
| NTE3029A Infrared Emitting Diode | 2/pak=$3.00 |
| NTE3030 size T1-3/4=5mm blinking red LED DC* | out |
| NTE3131 size T1-3/4=5mm blinking green LED | out |
| NTE3160 red rectangular LED | 5/pak=$2.40 |
| NTE3161 green rectangular LED | 3/pak=$2.96 |
| NTE3162 yellow rectangular LED | 5/pak=$3.05 |
| NTE3163 red rectangular LED | 5/pak=$2.40 |
| NTE3164 green rectangular LED | 5/pak=$2.96 |
| NTE3165 yellow rectangular LED | 5/pak=$3.05 |
| 3166 red rectangular LED | 5/pak=$2.40 |
| 3167 green rectangular LED | 5/pak=$2.96 |
| 3168 yellow rectangular LED | 5/pak=$3.05 |
| 3169 red square LED | 5/pak=$2.52 |
| CT-LED-1FG Self-blinking Green LED operates on 4.5VDC* | $3,06 |
| PH11-675 Self-Blinking Green 5MM (T-1-3/4) LED use resistor for 25mA | 2/pak=$4,59 |
| CT-LED-1FO Self Flashing Orange LED operates on 4.5VDC* | 4,35 |
| CT-LED-1FY Self Flashing Yellow LED operates on 4.5VDC* | $3,06 |
| PH11-674 Self-Blinking Yellow T-1-3/4 =5mm LED use resistor for 25mA | 2/pak=$4,59 |
| PH11-672 Self-Blinking Red 5MM T-1-3/4=5mm LED use resistor for 25mA | 2/pak=$4,59 |
| NTE30030 Yellow-Green T1=3MM Super Bright LED 14' 1600mcd 2.2VDC* | 3/pak=$1.10 |
| NTE30031 Green T1=3MM Super Bright LED 14° 5000mcd 3.5VDC* | $1.94 each |
| [5] NTE30032 Yellow T1=3MM Super Bright LED 10° 2500mcd 2.0VDC* | 3/pak=$1,90 |
| [5] NTE30033 Orange T1=3MM Super Bright LED 10° 2500mcd 2.0VDC* | 3/pak=$1,90 |
| [5] NTE30034 Red T1=3MM Super Bright LED 19° 2000mcd 1.86VDC* | 3/pak=$2,90 |
| [5] NTE30035 Amber T1=3MM Super Bright LED 10° 2500mcd 2.0VDC* | 3/pak=$1,90 |
| [out] NTE30036 Blue T1=3MM Super Bright LED 15° 3000mcd 3.5VDC* | $2,83 each |
| [5] NTE30037 Yellow-Green T1-3/4=5mm Super Bright LED 12° 2500mcd 2.2VDC* | 3/pak=$1,90 |
| [3] NTE30038 Green T1-3/4=5mm Super Bright LED 15° 10500mcd 3.5VDC* | $2,80 each |
| [5] NTE30039 Yellow T1-3/4=5mm Super Bright LED 12° 7000mcd 2.25VDC* | 3/pak=$4,69 |
| [5] NTE30040 Orange T1-3/4=5mm Super Bright LED 12° 5500mcd 2.0VDC* | 3/pak=$1,90 |
| NTE30041 Red T1-3/4=5mm Super Bright LED 12° 3500mcd 1.86VDC* | 3/pak=$1.10 |
| [5] NTE30042 Amber T1-3/4=5mm Super Bright LED 12° 5500mcd 2.0VDC* | 3/pak=$2,00 |
| NTE30043 Blue T1-3/4=5mm Super Bright LED 12° 3500mcd 3.5VDC* | $1.44 each |
| [5] NTE30044 White T1=3MM Super Bright LED 30° 7000mcd 3.6VDC* | $3,45 each |
| [5] NTE30045 White T1-3/4=5mm Super Bright LED 22° 16000mcd 3.6VDC* | $3,66 each |
| NTE30045 fits "Check Engine" etc dash warning lights 2000 Ford Explorer, Ranger etc | |
| NTE30053 Yellow-Green 8mm Super Bright LED 25° 1600mcd 2.2VDC* | 3/pak=$1.38 |
| NTE30054 LightGreen 8mm Super Bright LED 30° 4500mcd 3.5VDC* | 2/pak=$3.50 |
| NTE30055 Orange 8mm Super Bright LED 25° 3600mcd 2.0VDC* | 3/pak=$1.38 |
| NTE30056 LightRed 8mm Super Bright LED 25° 3600mcd 2.0VDC* | 3/pak=$1.38 |
| NTE30057 DeepRed 8mm Super Bright LED 30° 2200mcd 1.86VDC* | 3/pak=$1.56 |
| NTE30058 Blue 8mm Super Bright LED 35° 1500mcd 3.5VDC* | 2/pak=$2.84 |
| NTE30059 White 8mm Super Bright LED 30° 4000mcd 3.5VDC* | 2/pak=$3.74 |
 |
| figure 30054 =8mm LED |
| NTE30065 Yellow-Green T3-1/4=10mm Super Bright LED 40° 1300mcd 2.2VDC* | 3/pak=$1.38 |
| NTE30066 LightGreem T3-1/4=10mm Super Bright LED 40° 3500mcd 3.5VDC* | 2/pak=$3.50 |
| NTE30067 Orange T3-1/4=10mm Super Bright LED 40° 2000mcd 2.0VDC* | 3/pak=$1.38 |
| NTE30068 LightRed T3-1/4=10mm Super Bright LED 40° 2000mcd 2.0VDC* | 3/pak=$1.38 |
| NTE30069 DeepRed T3-1/4=10mm Super Bright LED 40° 3000mcd 1.86VDC* | 3/pak=$1.38 |
| NTE30070 Blue T3-1/4=10mm Super Bright LED 40° 1200mcd 3.5VDC* | 2/pak=$2.90 |
| NTE30071 White T3-1/4=10mm Super Bright LED 40° 4000mcd 3.5VDC* | 2/pak=$3.74 |
| NTE30122 Ultra Violet 380nm LED: see "UV" watermarks on US Currency (counterfeit detect) | 5/pak=$5.00 |
| 12VLED-5-GREEN special 12VDC Green led 10" red/black leads | $2,70 |
| 12VLED-5-PURPLE special 12VDC Purple led 10" red/black leads | $3,00 |
| 12VLED-5-RED special 12VDC Red led 10" red/black leads | $2,70 |
| 12VDC-LED-BLUE Super Bright LED 5MM customize CB S-Meter | $2,40 |
| MCF-LED1 Changing Color LED 5MM for CB customize 4.5VDC* | $10,50 |
| MCF-LED8 Changing Color LED 5MM for CB customize 4.5VDC* | $10,50 |
| * LED's require current limiting resistor for specified voltage |
| Use 150 ohm resistor with 5VDC power source for most LED's |
| Use 180 ohm resistor with 6VDC power source for most LED's |
| Use 330 ohm resistor with 12 to 14VDC power for flashing & changing color 4.5V LED's |
| Use 470 ohm resistor with 12 to 14VDC power for 2 to 3.5V super bright (NTE 5-digit) LED's |
| Use 1200 ohm resistor with 24 to 28VDC power for 2 to 3.5V super bright (NTE 5-digit) LED's |
| Use 1000 ohm resistor with 12 to 14VDC power for regular (NTE 4-digit) LED's |
 |
| application diagram for LED with current limiting resistor |
