| Microphone Holders & Clips |
| V811 Screw On Mic Clip 5/8" Mount HoleCenters | $1.00 |
| SOMC Screw On Mic Clip 25MM=1 inch Mount HoleCenters | $0,75 |
| LR-SOMC Large ScrewOn MicClip 32MM=1-1/4" MountHoleCenters | sold out |
| MH-1 Magnetic Mic Holder | $2,31 |
| BH-4 Plastic Buddy Hook to hang over knobs |
| MH4B Black Plastic Adhesive Microphone Holder | $2,04 |
| MBH-5 Metal Buddy Hook to hang over knobs |
| MK-10 replacement metal hanger button for back of mics | $1.39 |
| PH-SM70 Mike Holder for PA microphones 3/4-1-1/4" diameter | $6,30 |
| VS-12 Velcro (2) pair of 1 inch x 2 inch strips |
| Replacement Microphone Cords |
| MC-6C Coiled 22ga Microphone Cord 6-wire 6-ft stretched | $4,08 |
| MC-9C Coiled 22ga Microphone Cord 6-wire 9-ft stretched | $5,07 |
| MC-9C measures .210" with coiled portion 14-1/2" (not stretched) |
| TEC-60 standard coiled 4-conductor microphone cord | $5,82 |
| TEC-70 Extra Long Coiled 4-conductor Mic Cord 10ft max | $6.08
|
| A-525 Coiled 4 conductor cord molded square strain relief Astatic 525 | $6,30 |
| WEP8-6 coiled 8-conductor microphone cord 6-ft stretched | $6,48 |
| WEP8-10 coiled 8-conductor microphone cord 10-ft stretched | $9,03 |
| RAM-61112 long 6-conductor skinny cord fits Astatic mic | $11.98 |
| RAM-61112 measures .170" with coiled portion 12-1/2" (not stretched) |
| Astatic Microphone replacement Amplifiers & conversion kits |
| AST10-312 replacement amplifier board for TUG8 & TUG9 (D104) Astatic stands | $16.98 |
| AST-41283 Amplifier board & pot for TMD107, 555, 557; old D104M | $14.98 |
| AST-41506 complete PC-100 replacement board with potentiometer for TUP9 stand | $24.98 |
| AST-41198 BatteryBracket & VolumePot 51371 for TUG8 stand | $11.98 |
| AST-02392 Three-hole Jack for TUG8, TUP9 etc Astatic stands | $5.98 |
| AST-02393 Three-Pin Plug used in D104 head | salv-$10.98 |
| AST-41510 Nylon push rod for TUP9 Astatic mic stands |
| AST-MC320 Crystal cartridge for head of D-104 microphone | salv=$35 |
| Special Screw/nut for front & back plates of D104 head | salv-$2.50 each |
| AST-023-800-053 Chrome Spring for Grip Bar of Astatic TUG8, TUG9, TUP9 stands | ($10.00) |
| Black interior spring for base of TUP9 stand |
| DPDT Switch for TUG8 stands |
| D104-L chrome head only--no stand |
| MC612 dynamic cartridge for Buckeye 400 microphone |
| AST-02366 leaf switch SPDT for G-stand | $19.98 |
| Dynamic Microphone Cartridges--low impedance elements |
| M-02 Robyn Dynamic 500 ohm cartridge 32MM diameter x 22MM thick | $7.50 |
| M-03 Robyn Dynamic 500 ohm cartridge 41MM diameter x 16MM thick | $8.00 |
| NC-Carol Dynamic Noise Cancel Mic Cart 26MM (1") x 13MM (1/2") | $3,78 |
| NC-Carol fits into CBM74C & 80% of all Transistor CB microphones |
| Cart-U White Dynamic Cartridge: Uniden HR2510 & Motorola CB's | use NC-Carol |
| S-Shokai Dynamic 500ohm Mic Cartridge 32MM diameter x 20MM thick | $4,50 |
| W-Superstar Dynamic Cartridge 40MM diameter 19MM thick Cobra CA-73 | $5,01 |
| Mic Cartridge X is innards of W-Superstar above |
| Ceramic Microphone Cartridges--High Impedance elements |
| CR10-41 Ceramic One Inch Diameter Microphone Cartridge |
| MCR-T240 Ceramic Cartridge from Robyn T123B or T240 microphone | $18,00 |
| MC-J123 Ceramic Cartridge 023-2858-001 from Johnson Mic 1-3/4" x 7/16" | $19.00 |
| MC-T355 Ceramic Cartridge from Turner 355C Microphone 1-7/8" x 1/2" | $22.00 |
| MC-EUPHONICS Ceramic Cartridge from Euphonics CB Microphone 2" x 5/8" | $20.00 |
| MC-EVCB Ceramic Cartridge from ElectroVoice CB Microphone 2" x 1/2" | $20.00 |
| MC-564-1 Ceramic Cartridge for Astatic 525 & TMD107; 1-7/8" x 7/16" | $22.00 |
| MC-564-3 Ceramic Cartridge for old Astatic D104M | $22.00 |
| MC-569 Noise Cancelling Ceramic Cartridge for 555 & 557 | $22.00 |
| MC576-1 Ceramic Cartridge 1-1/2" diam =38MM Astatic D104M6 microphone | $23.98 |
| MC576-1 can be used to replace Turner Plus Three desk microphone cartridge |
| Microphone momentary Push-To-Talk Switches |
| R-PTT-2 DPDT body=26MM long, plastic plunger=13MM long | $2.99 |
| R-PTT-3 4PDT-pcb; body=21MM, metal plunger=15MM; fits DM452 echo mic | $4,49 |
| R-PTT-4 DPDT body=18MM long, metal plunger=16MM long | $2.99 |
| R-PTT-5 4PDT-pcb use in Turner M+3, M+3B, RK-76; Astatic 575M6 | $4,50 |
| R-PTT-7 DPDT tab-mount holes 22MM apart, metal plunger=14MM long | $2,99 |
| WEP-RKS DPDT Astatic 525/531/555/636/TMD107, Turner 350/360/M+2/RK56 | $4,44 |